Specifications
Setting Up Network Client
2 Network Client
Establishing a Network Connection
Bus speed, network traffic, network topology, packet size, and Intellex application(s) limit the data
sent across a network. The minimum requirement is 10BaseT; 100BaseTX is preferred.
• Use CAT 3 for 10Base-T (10Mbps) operation
• Use CAT 5 for 100Base-TX (100Mbps) operation
• Configure the network for the TCP/IP Protocol.
• Manually assign an IP address to each Intellex unit and, if appropriate, each Network Client
workstation.
Caution
Do not use a DHCP (Dynamic Host Configuration Protocol) server to assign the Intellex an IP address.
Establishing a Dial Up Connection
See Dial Up Connections on page 53.