User guide

Illustra Flex 1MP & 3MP Bullet
4
WARNING
 This unit operates at AC 24V/ PoE.
 Installation and service should be performed only by qualified and experienced technicians and comply
with all local codes and rules to maintain your warranty.
 To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.
 Wipe the camera with a dry soft cloth. For tough stains, slightly apply with diluted neutral detergent and
wipe with a dry soft cloth.
 Do not apply benzene or thinner to the camera, which may cause the surface of the unit to be melted or
lens to be fogged.
 Avoid aligning the lens to very bright objects (example, light fixtures) for long periods of time.
 Avoid operating or storing the unit in the following locations:
 Extremely humid, dusty, or hot/cold environments (recommended operating temperature: -40˚C to
+40˚C)
 Close to sources of powerful radio or TV transmitters
 Close to fluorescent lamps or objects with reflections
 Under unstable or flickering light sources
WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product
(applicable in the European Union and other European countries with separate collection
systems). This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.