User guide

Illustra Flex 1MP & 3MP Bullet
19
3. Administration and Configuration
3.1 Live View
Simply click on Live View on the top left side of the browser window while accessing the IP address of the
unit, and a live video is displayed directly in the browser window. When clicked on Configuration, a window
will be pop out for configuring “Image Parameters”, “Network Settings”, “System Settings”, “Event Settings”,
and “Record Settings”. Please refer to 3.2 Configuration
for more information. The current logged in identity
shows next right. If clicked on Logout, this window of administration and configuration will be closed.
Followings are explanations to the tabs on the left of the window.
 Stream 1/Stream 2/Stream 3: The unit offers a concurrent triple* streams for optimized quality and
bandwidth. Click start or stop to play or stop the video.
 Snapshot: Take a picture from live view.
Followings are explanations to the icons on the stream status bar
 : This icon indicates a motion event detected. When turned on and triggered, the little man keeps
running. Please refer to 3.2.4 Event Settings for more information.
 : This icon indicates an alarm event detected. When turned on and triggered, it begins to turn in red.
Please refer to 3.2.4 Event Settings for more information.
FIGURE 3-1: LIVE VIEW
* When the resolution is set to 2048x1536 or 2304x1296, only one single streaming is available.