User guide

Illustra Flex 1MP & 3MP Bullet
11
2.2.3 Connecting the Wires
1. To attach the camera to the fixed place.
F
IGURE 2-3: CONNECTING THE WIRES
2. Pass all the signal cables through the mounting bracket as the sample photo shown.
3. Connect the power cable to the power plugs with one of the following options.
 AC 24V: Connect 24V (～) cables to terminals ～AC 24V
 PoE: Connect the RJ-45 jack to a PoE compatible network device that supplied power through the
Ethernet cable
4. Insert audio cable and alarm cable to the unit, and connect the network cable to the RJ-45 terminal of a
switch.
F
IGURE 2-4: CONNECTING THE WIRES