Product data

VideoEdge NVR 4.1 Release Notes
38
8200-2735-07 D0
 Fractional frame rate setting is not supported in the NVR and will report as “unknown”.
 The NVR web client image settings screen will allow the sharpness value to be examined and
modified for some cameras. If the value is changed and saved then the new displayed value
may slightly differ from the value that was saved. That slight difference is expected behavior.
The difference is due to the conversion of a 0 to 100 value to a different range value that is
actually stored / persisted on the camera. For example, the actual sharpness (or aperture)
range on the camera could be 0 to 31 or 0 to 63.
Known Issues
Model
Known Issues
NW484
1. By default, the MPEG-4 capability is turned off programmatically. This will
effectively disabled the audio capability, since the Panasonic handler
utilizes MPEG-4 stream for audio streaming.
2. MJPEG frame rate can be reduced if customer manually enables the
MPEG-4 capability directly through the camera‟s web interface.MJPEG
frame rate can be reduced if customer manually enables the MPEG-4
capability directly through the camera‟s web interface.
NW502S, NP502
1. Max frame rate for dual streaming are 15fps for VGA and 10 fps for QVGA.
2. For single video stream, when the resolution is 1.3 mega pixels, the
maximum frame rate for H.264 is 30fps. When the resolution is 3 mega
pixels, the maximum frame rate for H.264 is 15fps.
3. The mode settings of H.264 and MPEG-4 operation needs to be explicitly
set at the camera.
4. Video standard has been wrongly represented in this case as video mode,
which is either 3 megapixel or 1.3 megapixel mode, with 4:3 and 16:9
aspect ratio settings. Since mode is not supported by Encoder profile, we
have used this as this has high impact on video streaming. (Shall wait for a
decision if this is objected).
5. Image white-balance supports 3 settings, namely:
 “1” – Auto White balance control mode
 “2” – Auto tracking white balance mode
 “3” – Auto tracking white balance under a sodium lamp mode
NW960, NW964,
NS950, NS954
1. By default, the MPEG-4 capability is turned off programmatically. This will
effectively disabled the audio capability, since the Panasonic handler
utilizes MPEG-4 stream for audio streaming.
2. MJPEG frame rate can be reduced if MPEG4 is manually enables directly
through the camera‟s web interface.
3. Video standard has been wrongly represented in this case as video mode,
which is either 3 megapixel or 1.3 megapixel mode, with 4:3 and 16:9
aspect ratio settings. Since mode is not supported by Encoder profile, we
have used this as this has high impact on video streaming. (Shall wait for a
decision if this is objected).
4. Supports 256 presets in the camera.
5. Supported pattern count is based on configuration in the camera which
might vary as 1, 2 or 4.
6. Image white-balance supports 3 settings, namely:
 “1” – Auto White balance control mode
 “2” – Auto tracking white balance mode
 “3” – Auto tracking white balance under a sodium lamp mode