Product data
VideoEdge NVR 4.1 Release Notes
19
8200-2735-07 D0
Appendices
Appendix A – AD 8-Channel IP Encoder (M & H)
Supported Models
Model
Category
Maximum
Resolution
MJPEG
MPEG4
H264
Audio
ADEIP8H
8-Port Encoder
720x576, 720x480
MJPEG
MPEG4
H.264
Audio
ADEIP8M
8-Port Encoder
720x576, 720x480
MJPEG
MPEG4
n/a
Audio
Supported Firmware
Firmware: Must be V3.1.4.3 kernel #2 or higher
Supported Key Functions
Video Streaming – Single and Dual
Video Codec – MJPEG, MPEG4 and H.264 and MPEG4 MJPEG
Audio Streaming – Audio Codec are AAC, G.711 ulaw and G.711 alaw
PTZ – Applies to analog cameras that have mechanical Pan, Tilt, and Optical Zoom
Dry Contact Events – Camera is polled for dry contact event at 100ms interval
Reset to Factory Defaults
Query Device
Reboot Device
Required Network Ports
Port 80 is for HTTP
Port 554 is for RTSP
Default Username and Password
Username: user
Password: user617
Limitations
Changing the video source requires a reboot of the encoder. During the reboot the device will
not respond.
Changing the interlacing parameter would require the encoder to be restarted. During the
reboot the device will not respond.
Changing streaming parameters like bit-rate, quality, frame-rate, key frame interval and
others would require the stream to be restarted, hence a small glitch in play out might be
observed during this time.
Focus and Iris is not supported by thin Client Web GUI, because Mango Encoder supports
only relative value change and does not support absolute change of values. However it is
supported in Pattern.










