Product data

VideoEdge NVR 4.1 Release Notes
13
8200-2735-07 D0
The table below highlights known new limitations or issues against the V4.1 release.
VideoEdge NVR V4.1 know limitations
VideoEdge NVR Server
Description
Suggested Work-Around
Using the IDP Discovery protocol prevents
adding AD IP SpeedDome cameras (ADVEIPSD
series) beyond IP broadcast range of the NVR.
It is recommended that you always set your IP edge
devices to static IP and accessible by the NVR LAN2
camera network.
Arecont Vision H.264 stream displays green
screen at start up for a few seconds.
Only applicable when initially adding the Arecont
Vision H.264.
AD Encoder (ADEIP series) image settings
menu does not have Focus or Iris.
No known workaround.
AD IP Speed Dome (ADVEIPSP series) image
may freeze after a long period time if the quality
setting is set to 100.
No known workaround.
Arecont Vision AV1355M and AV2100M-AI
setting for brightness may not initially work.
Reboot the camera if no change occurs with the
brightness setting.
Axis 241Q will by default occupy 4 camera slots
(spawn 4 processes – RTSP connections and
RTSP streams) even if all ports are not
connected to an analog video source.
An unused camera slot can be manually deleted..
Axis 233D Iris value settings may not be saved
correctly.
Change the Iris setting directly from the camera‟s web
page.
AD Encoder (ADEIP8 series) is unable to utilize
mechanical PTZ commands with Bosch analog
PTZ cameras.
No known workaround.
AD Encoder (ADEIP8 series) is unable to use
focus with AD SpeedDome and Pelco Dome.
No known workaround.
Arecont Vision AV2100 does not display live
video when using the password group.
Do not use a password group with this model camera.
Arecont Vision AV5xxx series have some
latency issues for both MJPEG & H264.
No known workaround.
Axis 210A (4.47), 211A (4.47.1), 231D (4.41.1),
232D (4.41.1), 241Q (4.47) setting for MJPEG
FPS for alert stream will use the Live FPS due
to camera firmware issue.
No known workaround.
AD Encoder (ADEIP8 series) supports only ONE
speed setting for the Bosh Zoom In and Out with
the Philips TC7560 protocol.
No known workaround.
Arecont Vision cameras may not display the
Auto Iris option in the Lens Sensor setup page
due to camera firmware issue.
No known workaround.