Specifications

Illustra Flex 1MP & 3MP Outdoor Dome
10
2.2.2 Disassembling the Camera
 Gently remove the screw to take off camera housing (3).
 Set the camera housing (4) aside.
FIGURE 2-1: DISASSEMBLING THE CAMERA
2.2.3 Connecting the wires
1. Connect the power cable to the power plugs with one of the following options.
 Inset power cable for AC 24V, Connect 24 V (~) cables to terminals ~AC 24V.
 PoE: Connect the RJ-45 jack to a PoE compatible network device that supplied power through the
Ethernet cable.