Quick Start Guide

Illustra Flex 3MP and 8MP Indoor and Outdoor Dome Cameras Quick Start Guide
8200-1456-02 K0 6
Checking appearance
When first unboxing, check whether if there is any visible damage to the appearance of the unit and
its accessories. The protective materials used for the packaging should be able to protect the unit
from most types of accidents during transportation.
Remove the protective part of the unit when every item is checked in accordance with the list in In
the box on page 5.
Procedure 1 Disassembling the camera
Refer to Figure 10 on page 6 for a pictorial index of disassembling the camera.
Step Action
1 Remove the screws (5) to take off camera housing.
2 Gently remove the camera housing (4) and dome cover (6) and set aside.
Figure 10 Disassembling the camera
- End -
Procedure 2 Connecting the wires
Step Action
This unit supports one of the following options as power supply:
1 AC 24V:
a Connect 24V (～ ) cables to terminals ～ AC 24V
2 PoE: