Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
64 8200-1456-01 M0
Installation
In the box
Check everything in the packing box matches to the order form and the packing slip. In addition to
this guide, items below are included in the packing box.
• 5 plastic 25mm screw anchors
• 4 Phillips pan head tapered screws 3mm x 25mm
• 3 Phillips pan head tapered screws 3mm x 10mm
• 3 Hex stand-offs M2.5 x 0.45P x 17mm
• 3 Phillips flat head machine screws M2.5 x 0.45P x 4mm
• 1 Deco adhesive backed trim ring
• 1 Front adhesive backed Mylar ring
• 1 Metal plate ring
• 1 Torx T10 security L-Key
• 1 printed Quick Start Guide
• 1 printed hot surface Warning leaflet
• 1 printed regulatory document
• 1 Guide pattern template for camera head
• 1 Guide pattern template for electronics box
Contact your dealer if any item is missing.
Installation tools
The following tools assist with installation:
• a drill
• screwdrivers
• wire cutters