Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
63 8200-1456-01 M0
Note:The connector cable of the Micro Dome camera should be contained in a conduit suitable for
indoor use.
Note:Connectors and field wiring terminals for external Class 2 circuits provided with marking
indicating minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field wiring
terminals.
Figure 79 Metal plate ring description
The camera lens module must be securely attached to the metal plate ring when attaching the
camera to a wall.
Table 80 Metal plate ring letters and arrow descriptions
Description
A
For the 3 (3mm) Phillips pan head tapered screws.
L
For the 3 Phillips flat head machine screws M2.5 x 0.45P x 4mm that attach to:
• The 3 hex standoffs for connecting into a surface mount
• The 3 screw holes in the lens module for behind the surface mounting. For this the unlettered holes
are for alignment with the 3 posts on the lens module.
Up
Arrow
This identifies the top of the video image. By configuration the image can be inverted as well.