Installation Guide

Illustra Flex Series Installation and Configuration Guide
205 8200-1456-01 M0
Table 128 Flex 8MP Camera resolutions
Flex 8MP camera resolutions
Stream 1
Codec
FPS Stream 2
Codec
FPS Stream 3
Codec
FPS
(3840x2160)
4K 16:9
H264/H264
IntelliZip
H265/H265
IntelliZip
MJPEG
1-15
(1280x720)
720p 16:9
H264/H264
IntelliZip
H265/H265
IntelliZip
MJPEG
1-15 or 1-30
(640x360)
nHD 16:9
H264/H264
IntelliZip
H265/H265
IntelliZip
MJPEG
7-15
(3264x1840)
16:9
(1024x576)
16:9
(480x360)
4:3
(2592x1944)
4:3
(640x360)
nHD 16:9
(384x288)
4:3
(2688x1520)
16:9
(480x360)
4:3
(2048x1536)
QXGA 4:3
(384x288)
4:3
(1920x1080)
1080p 16:9
H264/H264
IntelliZip
H265/H265
IntelliZip
MJPEG
1-60
(1664x936)
16:9
(1280X720)
720p 16:9
Note:Stream 2 is limited to a maximum of 15 FPS when: Stream 1 is set to 2048x1536 or above. Stream 1 is set to
1920x1080 or above with FPS greater that 30.
Note:Stream 2 automatically reconfigures to a maximum of 15 FPS if Stream 1 FPS is 30 or greater.
Note:Stream 2 supports 1-30 FPS when Stream 1 is set to 1920x1080 or below with FPS set to a maximum of 30.
Note:Codec MJPEG is not supported when the resolution is equal to or greater than 2048x1536.
Note:TrueWDR 2x. When TrueWDR2x is switch on, the following limits apply: For 2048x1536 and above, the
framerate is limited to 15FPS (as it is when TrueWDR is off). For 1920x1080 and below, the framerate is limited to
30FPS.
Note:TrueWDR 3x is not available on 8MP units.