Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
193 8200-1456-01 M0
- End -
Audit Log
The Audit Log will log details obtained when anything is logged are source, class, result, user and a
description of the change.all changes that have been made in the following areas of the Web User
Interface as outlined below:
• Changes in FTP, CIFS, SMTP, IPV4, IPV6, DNS and SNMP are logged under class
NETWORK.
• Changes in Stream are logged under class VIDEO.
• Changes in Reboot, Reset and Upgrade are logged under class MAINTENANCE.
• Changes in DIO and ROI are logged under EVENT.
About
The About menu provides the following camera information:
• Camera Name
• Model
• Product Code
• Manufacturing Date
• Serial Number
• MAC Address
• Firmware Version
• Hardware Version
Procedure 198 Display Model Information
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select About from the System menu. The model tab displays.
- End -
Procedure 199 Edit Camera Name
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select About from the System menu. The model tab displays.
3 Edit the name in the Camera Name textbox.
- End -