Installation Guide

191 8200-1456-01 M0
Procedure 192 Configure Health Monitor Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Health Monitor from the System menu.
3 Select the Recording Period from the drop-down menu.
4 Select the corresponding check box to enable health monitoring on a parameter.
OR
Clear the corresponding check box to disable health monitoring on a parameter.
The default setting for all parameters is Enabled.
- End -
PTZ Summary
The Health Monitor option displays the following PTZ statistics information:
• Pan Rights
• Pan Lefts
• Tilt Down
• Tilt Up
• Zoom Out
• Zoom In
Procedure 193 Display PTZ Summary Information
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Health Monitor from the System menu.
3 Select the PTZ Summary tab.
- End -
Logs
Information is provided on system and boot logs created by the camera.
System Log
The system log gives the most recent messages from the unix/var/log/messages file. Information
will include the following:
• Messages about system behavior such as process startup/shutdown.
• Warnings about recoverable problems that processes encounter.
• Error messages where processes encounter problems they cannot fix; note that this does
not mean that the process will not continue to work, only that it encountered an issue it
could do nothing about.