Installation Guide

Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 190
Or
Select Cancel.
- End -
Procedure 191 Delete a Stored Audio file
Step Action
1 Select Audio from the System menu.
2 Select the Audio Clips tab.
3 Select the corresponding Delete check box to mark the audio file for deletion.
Or
Deselect the corresponding Delete check box to keep the audio file.
4 Select the Select All check box to mark all audio files for deletion.
5 Select Delete to delete the selected audio files.
You will be prompted to confirm the deletion.
6 Select OK to confirm the deletion.
Or
Select Cancel.
- End -
Analog Video
You can select an Analog Video Source from the drop-down menu found in the Analog Video menu.
You can manage output format of the analogue video by the dip switch located on the camera (default
value) or through the Web User Interface page.
Available options are PAL, NTSC and OFF.
Note:This section does not apply to the Compact Mini Dome and Micro Dome.
Note:Once PAL or NTSC are selected through the Web User Interface- the physical DIP Switch
selection on camera will be obsolete.
Health Monitor
The Health Monitor function provides visibility on the health status of popular device
parameters.Each parameter can be enabled or disabled. The refresh frequency of the health monitor
can be determined by selecting a duration from the Reporting Period drop-down menu.