Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 186
Procedure 183 Restore Camera from Backup
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the Backup/Restore tab.
4 Select Browse.
The Choose file to Upload dialog displays.
5 Navigate to the location where the firmware file has been saved.
6 Select the firmware file then select the Open button.
7 Select Upload.
The file transfer begins. Do not disconnect power to the camera during the upgrade process.
The camera restarts automatically after the updates have been completed, this can take
from 1 to 10 minutes. The Log in page displays.
- End -
SmartVue
The SmartVue feature implements Illustra Cameras to Cloud (C2C) from SmartVue to provide a
secure, scalable, cloud-based storage solution. Before you enable this feature, you need to install the
mobile application. You can download the app from either the iOS App Store or the Google Play Store
and then you can complete the registration using the app.
Procedure 184 Enabling SmartVue integration
Note:If a SmartVue server is not setup when enabling the SmartVue feature then the camera may
become inaccessible.
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the SmartVue tab.
4 Select Apply.
5 Enter an administrator password to validate the request.
• If the camera detects an Internet connection, it continues with the
SmartVue integration request. If an Internet connection is not detected
an error displays and the request is rejected.
Note:If an Internet connection is detected, a factory reset begins. This clears all previous user
defined configurations including user management settings.
The camera boots in SmartVue mode and is only accessible using HTTPS.
The password changes to a string of characters determined by the SmartVue cloud.
6 Refer to SmartVue documentation and follow the procedure to add a camera to regain
access.