Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
183 8200-1456-01 M0
System
When you open the System menu, the Maintenance page appears, as seen in Figure 123 on page
183.
Figure 123 System Menu
The System Menu provides access to the following camera settings and functions:
• Maintenance
• Date Time
• Audio
• Analog Video
• Health Monitor
• Logs
• About
Maintenance
The Maintenance menu allows you to restore the camera settings to factory default, reboot the
camera and apply a firmware upgrade.
Reset
To perform a physical reset of the camera, refer to the chapter regarding your camera model in this
guide.