Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
177 8200-1456-01 M0
Procedure 171 Configure Multicast Streaming
Step Action
1 Select Network on the Web User Interface to display the Network menu options and click
the Multicast tab.
2 Select the Stream Number from the drop-down list you want to configure.
3 In the Video Address field, enter a valid IPaddress for the Multicast broadcasting. The
valid range for the IP address is:
224.xxx.xxx.xxx
232.xxx.xxx.xxx
234.xxx.xxx.xxx
239.xxx.xxx.xxx
Multicast stream addresses must be unique to the stream and cameras.
4 In the Port field, enter a port for the Multicast broadcasting. The Multicast stream port must
be unique to stream cameras. The approved port range is: 0-65535.
5 In the Time to live field, enter a value.
Example of correct Mutlicast configuration:
Stream.1.Multicast.IPAddress=224.16.18.2
Stream.1.Multicast.Port=1032
Stream.2.Multicast.IPAddress=224.16.18.2
Stream.2.Multicast.Port=1030
Stream.3.Multicast.IPAddress=0.0.0.0
Stream.3.Multicast.Port=0
FTP
Configure the FTP settings for the FTP server. This is required to send video files from triggered
analytic alerts. FTP must be configured to enable FTP video alerts when using analytics.
Note:FTP settings can also be configured in the Network menu.
Procedure 172 Configure FTP Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select FTP from the Network menu.
3 Select the Enable check box to enable FTP.
OR
Deselect the Enable check box to disable FTP.