Installation Guide

Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 153
Note:Audio Playback is not applicable to the Compact Mini Dome and Micro Dome
camera.
10 Select the PTZ Action option from the drop-down menu.
Note:PTZ Action is only applicable to the PTZ camera.
11 Select the PTZ Parameter option from the drop-down menu.
Note:PTZ Parameter is only applicable to the PTZ camera.
- End -
Editing a Event Action
Modify the details of an existing event action.
Procedure 132 Edit an Event Action
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Actions from the Events and Actions menu.
3 Select an entry on the event actions list, you can edit the following:
• Name
• Output - Enable/Disable
• Record - Enable/Disable
• Email - Enable/Disable
• FTP - Enable/Disable
• CIFS - Enable/Disable
• Audio Playback - select the required audio clip
• PTZ Action - select the required PTZ Action
• PTZ Parameter - select the required PTZ Parameter
- End -
Alarm I / O
Note:This section does not apply to the Compact Mini Dome and Micro Dome.
The cameras provide one alarm input. By connecting alarm devices, such as smoke alarms, twilight
sensors, or motion sensors to these inputs you can enhance the usability of your video surveillance
system.
For 15 seconds after being triggered, any additional individual input changes on that alarm source are
logged and do not generate any other action. This is to reduce the effect that any oscillating alarm
source, such as if a door is simply vibrating in the wind, causing a series of alarms to be generated.
Input alarms are triggered upon change of state. Either from opened to closed or from closed to open.
The camera reports the current state of each input alarms (open or closed) as well as an active or