Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
152 8200-1456-01 M0
• Send an external alarm via email that includes alarm detail, where to retrieve the AVI
video file and one JPEG picture of the event if recording MJPEG to micro SD Card. If
MJPEG is not being recorded on micro SD Card, then no JPEG picture is sent.
• Send an AVI video file to a pre-configured external FTP or CIFS server. The video file
contains pre and post alarm video buffer.
• Trigger alarm out.
• Audio Playback: Playback and Audio clip from the camera speakers when triggered.
• PTZ Action: Perform a stored preset, pattern, scan or sequence. The result of this PTZ
action will continue until another PTZ or return home command is received. A PTZ
command from the web GUI or ONVIF will be responded to immediately, possibly
interrupting the programmed PTZ action. A PTZ action from a differemt digital input will
also be done immediately.
Note:A micro SD Card must be inserted to enable recording and so that the camera can send FTP,
CIFS, and SMTP events. SMTP e-mails are sent without inserting a micro SD card but do not include
snapshot images of the event trigger. Micro SD cards are also required for audio clip storage on the
camera.
Creating an Event Action
Configure an event action which can be triggered by an analytic alert.
Procedure 131 Create an Event Action
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Actions from the Events and Actions menu.
3 Select an entry on the event actions list and enter an event action name in the Name text
box.
4 Select the Output check box to enable an alarm output.
5 Select the Record check box to enable the Record Settings.
6 Select the Email check box to send an e-mail to the email address configured in the
Configure SMTP Settings procedure.
7 Select the FTP check box to send a video file to the FTP details configured in the Configure
FTP Server Settings procedure.
8 Select the CIFS check box to send a video file to the SFTP details configured in the
Configure CIFS Server Settings procedure.
Note:
1. If you select Record, the AVI clip is saved to the micro SD card and it has to be
removed from the camera to view the video file.
2. AVI clips can only be sent through FTP if a micro SD card has been installed and
FTP and CIFS has been selected.
3. The selected pre and post event duration buffer is included in any video clips sent
through FTP and CIFS.
9 Select the Audio Playback option from the drop-down menu.