Installation Guide

Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 151
Test FTP Settings
Test the SMTP settings that have been configured in Procedure 7-4 Configure FTP Server Settings.
Procedure 129 Test the FTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select Test.
A sample text file is sent to the specified FTP destination to confirm that FTP settings are
correct.
- End -
CIFS
The CIFS feature permits files generated from the camera such as alarm related video to be directed
to network attached file storage through the Common Internet File System protocol. This
supplements existing distribution methods such as FTP, SFTP and email.
Procedure 130 Configure CIFS Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the CIFS tab.
4 Select the Enable check box to enable CIFS.
OR
Clear the Enable check box to disable CIFS.
The default setting is ‘Enabled’.
5 Enter the network path in the Network Path text box.
6 Enter the domain name in the Domain Name in the text box.
7 Enter the username in the Username text box.
8 Enter the password h in the Password text box.
- End -
Event Actions
The camera can be commanded to carry out a specified operation when an analytic alert is triggered
which are defined using event actions. Up to 5 event actions can be configured on the camera.
The event action can be used to configure any combination of the following actions:
• Record a clip to micro SD Card.