Installation Guide

145 8200-1456-01 M0
Sequences
A Sequence is a sequential display of multiple camera Presets. Sequences provide a methodical and
effective way to monitor multiple areas of interest by switching to different Presets automatically.
Sequences are created by identifying Preset views to include in the Sequence and specifying a dwell
time that controls how long each Preset remains on-screen before switching to another Preset.
Up to 16 Sequences can be created, each with 16 steps (Presets)
Adding a Sequence
Create a new sequence on the camera using defined presets. Refer to Add a Preset on Page 123 if
no presets have yet been added to the camera.
Procedure 122 Add a Sequence
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
If no presets have been created, referto Add a Preset on Page 123 before continuing to the
next step.
2 Select Sequences from the PTZ menu.
3 Select the Add Sequence tab.
4 Enter the Sequence Name.
5 Select a preset from the Preset Name drop-down menu.
6 Enter a dwell time in seconds in the Dwell Time (sec) text box.
The settings are 10-500.
7 Select Add.
The preset is now listed as part of the sequence.
8 Repeat steps 5 to 7 to add further presets to the sequence.
Note:Up to 16 presets can be added to a sequence.
9 Select Apply to save the sequence.
- End --
Activating a Sequence
Activate a selected sequence.