Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
141 8200-1456-01 M0
Note:There are two Apple Peel patterns on the camera by default. Apple Peel pattern one is read only
and cannot be edited ordeleted. Apple Peel pattern two can be edited and if necessary deleted from
the camera.
Adding a Pattern
Create a new pattern.
Note:A 15 minute time-out period is implemented when adding a pattern. If no command is received
within the time-out period, the Add a Pattern procedure will automatically terminate.
Procedure 115 Add a Pattern
Step Action
1 Select Setup on the Web User InterfaceI banner to display the setup menus.
2 Select Patterns from the PTZ menu.
3 Select the Record tab.
The Record tab displays.
4 Select to start the video stream if it is not already active.
The video pane will display the current camera view.
5 Enterthe Pattern Name.
6 Select Start.
The Record page will update with an Add and Cancel button.
7 Adjust the camera view as required.
• Pan, Tilt and Zoom
8 Select Add to save the pattern.
The pattern name is entered in the table on the Patterns tab.
Or
Select Cancel.
- End -
Running a Pattern
Activate an existing pattern.