Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 138
- End --
Preset
A Preset is a pre-positioned camera scene that you program using the pan, tilt and zoom options. Up
to 96 presets can be programmed on the camera.
Adding a new Preset
Create a new preset position on the camera.
Procedure 111 Add a Preset
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Presets from the PTZ menu.
The Preset tab is displayed
3 Select to start the video stream if it is not already active.
The video pane will display the current camera view.
4 Adjust the camera view as required.
• Pan, Tilt and Zoom.
• Focus Mode (Auto or Manual Focus points).
Preset can also store additional Picture Settings when Exposure Mode: Shutter Priority is
selected. In this case Preset can save Exposure Offset and Exposure settings. These will
then be changed accordingly with a prest call up.
5 In a numbered slot on the preset table, select to add the new preset.
6 Enter the preset name in the Preset Name text box.
7 Select Add to save the preset.
OR
Select Cancel.
- End -
Viewing a Preset
View an existing preset position.
Procedure 112 View a Preset
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Preset from the PTZ menu.
The Preset tab displays.