Installation Guide

Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 127
• Auto Low- camera will adjust between BW and Color depending on
light levels.
• Auto Mid - camera give a good balance of Color and BW depending on
the scene.
• Auto High - increases the chance of switching to BWmode as light
levels drop.
• Manual - a slider bar displays, the user can adjust the setting to suit
the environment.
The default setting is 'Auto Mid'.
Picture Adjustment
Adjust brightness, contrast, and saturation of the image displaying on the video pane.
Procedure 91 Adjust the Brightness, Contrast and Saturation
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Additional tab from the Basic Configuration menu.
3 Select to start the video stream if it is not already active.
The video pane displays the current camera view.
4 Use the slider bars to adjust:
• Brightness
• Contrast
• Saturation
• Sharpness
• Hue
The values range from 1% to 100%. The video pane updates to display the new settings.
- End -
Procedure 92 Restore Picture Balance Defaults
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Settings tab from the Basic Configuration menu.
3 Select Defaults to restore the default settings.
The default values are:
• Brightness: 50%
• Contrast: 50%
• Saturation: 50%
• Sharpness: 50%
• Hue:50%