Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
Illustra Flex Series Installation and Configuration Guide
8200-1456-01 M0 121
• Stream 3 7 - 15 fps. The default is 15 fps.
Note:FPS varies depending on other features - refer to the Flex Gen 2 Release Notes for further
information.
8 If MJPEG has been selected, MJPEG Quality enables. Use the slider bar to select the
MJPEG Quality.
The default setting is 50.
OR
9 If H264 has been selected in step 4, Rate Control will be enabled. Select the required Rate
Control by selecting the radio buttons:
• VBR (Variable Bit Rate)
• CBR (Constant Bit Rate)
• CVBR (Constrained Variable Bit Rate)
The default setting is ‘CVBR’.
a If VBR has been selected, VBR Quality is enabled. Select the required VBR Quality
from the drop-down menu. The default setting is ‘High’.
• Highest
• High
• Medium
• Low
• Lowest
OR
b If CBR has been selected, CBR Bit Rate will be enabled. Use the slider bar to select
the CBR Bit Rate. The default setting is 1000.
OR
c If you select CVBR, Max Bit Rate is enabled. Use the slider bar to select the Max Bit
Rate. The default setting is 8000.
- End -