Installation Guide

Table Of Contents
120 8200-1456-01 M0
Table 113 on page 116 provides information for the stream resolutions of the Micro
Dome camera herein.
Table 117 Stream Set (all resolution, codecs and frame rate combinations of Stream 1,
2 and 3 are valid)
Normal Mode
Resolution
Max FPS
TWDR Off TWDR 2x TWDR 3x
Stream 1
H.265,
H.264,
Intellizip,
MJPEG
1920 X 1080 (1080p)
16:9
60 30
-
1664 X 936 16:9 60 30
-
1280 X 720 (720p) 16:9 60 30
-
Stream 2
H.265,
H.264,
Intellizip,
MJPEG
1280 x 720 (720p) 16:9 30 *1 30 *1
-
1024 x 576 (PAL+) 16:9 30 *1 30 *1
-
960 x 544 16:9 30 *1 30 *1
-
816 x 464 16:9 30 *1 30 *1
-
640 x 360 (nHD) 16:9 30 *1 30 *1
-
480 x 272 16:9 30 *1 30 *1
-
Stream 3 MJPEG
640 x 360 (nHD) 16:9 15 15
-
480 x 272 16:9 15 15
-
Note:*1 - Stream 2 is restricted to 15 FPS when Stream 1 is greater than 30 FPS. A
maximum of 5 concurrent Streams are supported by each camera, this includes shared
Streams.
7 Use the slider bar to select the Frame Rate (fps).
The settings for 3MP cameras are:
Stream 1 - 1 - 60 fps, default 30. 60 fps is only available on Stream 1
with resolution 1920x1080 or lower.
Stream 2 - 1 - 30 fps, default is 15 fps. This stream is limited to 15 fps
if Stream 1 is 60 fps.
Stream 3 - 7 - 15 fps. Default is 15 fps.
The settings for 8MP cameras are:
Stream 1 - 1 - 15 fps, or 1-60 fps depending on the resolution. Default
is 15 fps. 60 fps is only available on Stream 1 with resolution
1920x1080 or lower.
Stream 2 - 1 - 15 fps, or 1-30 fps depending on the resolution. The
default is 15 fps. This stream is limited to 15 fps if stream1 is 60 fps.