Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
114 8200-1456-01 M0
Video Menu
When you select the Video menu, the Streams page displays, as seen in Figure 112 on page 114.
Figure 112 Video Menu
The Video Menu provides access to the following camera settings and functions:
• Streams
• Picture Settings
• Date / Time / OSD
• Privacy Zones
Streams
You can configure up to three independent video streams on the camera: Stream 1, Stream 2 and
Stream 3.
Video displaying on the video pane reflects the settings configured in the stream selected from the
drop-down menu, either Stream 1 or Stream 2 or Stream 3.
Note:The Web User Interface uses Stream 3.
Alarm Video
Edge Recording
Camera can directly record specific events (MD, DIO and Face detection) directly to Micro SD card.
User can chose either Stream 1, 2 or 3 to be recorded. When setting up motion detection on the
camera, both streams can be used. Alarm Video is configured in the Edge Recording > Record
Settings menu.