Installation Guide
Table Of Contents
- Overview
- Illustra Flex Series 3MP and 8MP Indoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Dome Camera
- Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras
- Illustra Flex Series 3MP and 8MP Indoor Box Camera
- Illustra Flex 3MP Outdoor Compact Mini Dome Camera
- Illustra Flex Series 2MP Indoor and Outdoor IR PTZ Camera
- Illustra Flex 2MP Indoor Micro Dome Camera
- Network Topology
- Network Connection
- Configuration
- Appendix A: User Account Access
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Stream Tables
- Appendix D: Camera Defaults
- End User License Agreement (EULA)
101 8200-1456-01 M0
Procedure 59 Configure Orientation Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select the Picture Basic tab from the Basic Configuration menu.
3 Select the required Orientation setting:
• Mirror
• Flip
Mirror and Flip settings are not selected by default. The video pane updates to display the
new settings.
Note:When wall mounting the camera you should select Flip and Mirror to correct
the lens orientation.
Note:This setting is not supported on the PTZ cameras.
- End -
Focus / Zoom
You can configure the focus and zoom using the Web User Interface. You can use the plus and
minus arrows to fine tune the image. The Zoom slider bar is used to manually zoom in and out to
manually configure to picture. The table below describes the features supported by each camera.
Table 111 Lens features supported for the Indoor and Outdoor Dome, Bullet, and Box cameras
Indoor
Dome
Outdoor
Dome
Bullet Box PTZ
Mechanical Focus X
Motorized Focus X X X X
Mechanical Zoom
Motorized Zoom X X X X
Lens Calibration X X X
Lens Selection X
Auto One Touch X X X
X
NOTE: Auto
back focus
Configurable Continu-
ous Auto-Focus
Note:None of the options in Table 88 apply to the Compact Mini Dome and Micro Dome as this has a
fixed lens.