Specifications

Intellex IP
Installation and Configuration Guide 75
Changing an AD device configuration
Once an IP Encoder or IPSDU8 have been added to the IP Sources, both the configuration and
the device settings can be modified.
Modifying an IP Encoder’s or IPSDU8’s configuration
1 From the main screen, select Setup.
2 Select IP Sources.
3 Highlight the required IP Encoder or IPSDU8, then select Device Setup.
A new browser window will open displaying the Main Configuration Page. For more information
on configuring either the IP Encoder or IPSDU8, refer to the IP Encoder Installation and User
Guide or the IPSDU8 Configuration and User Guide.
Note
The Device Setup button can not be selected unless an AD device is highlighted.
Modifying an IP Encoder’s or IPSDU8’s Device Setup
1 From the main screen, select Setup.
2 Select IP Sources.
3 Highlight the required IP Encoder or IPSDU8, then select Edit.
The Configure AD Device screen will be displayed.
Note
The Edit button can not be selected unless an AD device is highlighted.