Specifications

17
Configuring the Intellex
Configuring the Operating System
The Intellex uses the Windows® operating system to configure the regional, mouse, time zone,
network, printer, and language settings; you must exit to Windows. Please note that exiting to
Windows is a protected feature. You must have the Exit to System privilege to access it.
Windows screens appear in English, regardless of the language version of Intellex. Consult
Microsoft Windows installation instructions for setting the operating system to another language.
Note
Intellex Ultra software is compatible only with Windows XP Pro SP2.
Microsoft Installer
Microsoft Installer (.msi), standard in the installation process, enables third party software
distribution tools to deploy and manage Intellex and Network Client software.
Exiting to Windows
1 From the main screen, click Utility.
2 Click Exit. A confirmation message appears.
3 Click Yes to exit to Windows. The Enter PIN Code screen appears.
4 Enter the system exit code. (Contact your dealer or your system administrator for this code.)
5 Click OK.
Configuring the Intellex Ultra composite video output feature
The Intellex Ultra composite video output feature enables the BNC MAIN MON video output to
drive a composite monitor with either live video from the active cameras or with playback video,
depending on how the Intellex Ultra system is configured.
The Intellex Ultra composite output feature also enables the recording of playback video to
standard video tape recorders.
Note
This procedure is relevant to the Intellex Ultra composite video output feature (also referred to as
VACD3), the composite video output feature on the Intellex DVMS unit remains unchanged.
Setting the Intellex Ultra VACD3 output mode and graphics overlay
To set the Intellex Ultra VACD3 output mode and graphics overlay you must: