User`s manual

User’s Manual
74 Advanced Operations
Items in this menu are described in the following table.
Exporting the configuration to a file with a specific name enables you to save multiple
unit configurations for safekeeping. Remember to uniquely name the configuration
files for specific units, and to list these names in an appropriate location for later
reference when later importing the configurations. File names follow the DOS 8.3 file
name convention (up to eight (8) characters, no spaces).
NOTE: Saving a different configuration to the same copy destination with the same
file name will overwrite the previous configuration file without warning.
Loading a Unit Configuration (Import Configuration)
To import a configuration that was previously exported, make sure the device to
which you saved the configuration, such as a USB Flash Drive, is connected to the
unit. Select Import Config from the Save/Load Configuration menu and press Enter.
The following menu is displayed:
MENU ITEM DESCRIPTION
Copy Destination Lists available destinations to which the configuration
can be exported. Press Left/Right to select a destination.
Export Config Name Enables you to enter a name for the configuration file.
Use the virtual keypad to enter the configuration file
name. Up to eight (8) characters, with no spaces, can be
used to form the file name, which has an extension of
.dmc. The default file name is digimux.dmc.
NOTE: Note the name of the configuration file. When
you import this configuration, you must correctly
enter the file name.
Begin Starts exporting the file to the copy destination. Select
YES to begin the export. NO aborts the export.
Import Configuration
1 Copy Destination Import Configuration
2 Import Config Name
3 Begin