User`s manual

User’s Manual
72 Advanced Operations
SAVING AND LOADING A CONFIGURATION
The Save/Load Configuration menu is used to save current settings. It is also used to
restore the DigiMux to the default configuration set by the Administrator, or to the
factory settings. Configuration settings can also be saved to and loaded from an
external drive. Saved configuration settings can be used across multiple DigiMux
units.
NOTE: Take care in loading configurations on multiple units. Loading the same
configuration on multiple units saves time in overall unit configuration.
However, some settings are unit specific, such as unit IP addresses and RS-
485 addresses.
Select Save/Load Configuration from the Main Menu and press Enter. The following
menu is displayed:
Items in this menu are described in the following table.
NOTE: Users can use the Save Administrator Setting only. All other items require the
Administrator’s passcode.
Save/Load Configuration
1 Save Administrator Setting
2 Load Administrator Setting
3 Load Factory Setting
4 Load Factory Passcode
5 Import Config
6 Export Config
MENU ITEM DESCRIPTION
Save Administrator Setting Saves the current settings as the Administrator’s
Configuration. Select Yes to save the
Administrator Setting, or No to cancel.
Load Administrator Setting Recalls the Administrator’s Configuration from
the on-board non-volatile memory. Select Yes to
load the Administrator Setting, or No to cancel.
Load Factory Setting Recalls the Factory Default setup configuration
from the read-only memory. Select Yes to load the
factory setting, or No to cancel.