User`s manual

DigiMux
Advanced Operations 69
The items in the Motion Detection menu are described in the following table:
Setting Up Motion Detection
After you enable motion detection for a camera, you define the motion detection
alarm parameters for Day, Night and Weekend scheduled alarms. To define motion
detection parameters for a camera, follow these steps, starting from the Motion
Detection menu:
1. Select Motion Detection and choose ON.
2. Select Configuration Table and press Enter.
The Configuration Table is displayed. This table contains three parameters for
motion detection that you set for each camera. By default, Day motion detection is
defined via Condition
1, and Night and Weekend motion detection is defined via
Condition
2. It is possible to turn motion detection off for any camera by selecting
N, for none. These settings can be changed to 1, 2, or N by pressing the Enter key
over the indicated table entry for each camera in the table:
Day: Motion Default is Condition 1
Night: Motion Default is Condition 2
Wkd: Motion Default is Condition 2
Enter the condition desired for Day: Motion, Night: Motion, and Wkd: Motion by
pressing the Enter key. Press Esc when you have completed these entries for the
desired cameras.
MENU ITEM DESCRIPTION
Motion Detection Use to enable or disable the motion detection function of
the DigiMux. By default, the value is OFF.
Configuration Table Use to indicate the mode in which motion detection is
enabled for Day and Night schedules. The settings are:
N = None: No motion detection schedule
1 = Condition 1: Default for Day schedule settings
2 = Condition 2: Default for Night and Weekend
schedule settings
See the Configuration Table on page 44 for information
about the table.
Condition 1
Condition 2
Use to set up the detection area and sensitivity for each
camera input for one or both of these conditions.
NOTE: These items are inaccessible (grayed-out) when
Motion Detection is OFF.