User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
68 Advanced Operations
Dial-Out Phone No (Number)
The Dial-Out Phone No (Number) option enables you to enter the phone number that
the unit dials via an external modem for event/alarm notification. From the Set up
menu, select Dial-Out Phone No and press Enter. The following menu is displayed:
Enter the phone number by pressing the corresponding Camera keys. If the unit is
dialing a modem that does not require any pause, enter the number only. If contacting
the modem requires a pause in the number, enter a p. When the number is completed,
press ESC to exit the menu.
The phone number is dialed via the external modem when an alarm is triggered and
Dial-Out Phone No is ON.
NOTE: Dial-Out requires an external USB Modem, or an RS-232 Modem with a USB
to RS-232 converter. A dedicated analog standard POTS line is also required.
Do not use a PBX or digital line with this modem.
MOTION DETECTION
The Motion Detection menu allows you to configure motion detection alarms for each
camera attached to the DigiMux. In the Alarm Set Up Menu, move the cursor to
4
Motion Detection and press Enter. The following menu is displayed:
Dial-Out Phone No
0123456
0 1 2 3 4 5 6 7 8 9 p
<space> Prev Next
Motion Detection
1 Motion Detection OFF
2 Configuration Table
3 Condition 1
4 Condition 2