User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
64 Advanced Operations
The items in the Remote Notification menu are described in the following table:
MENU ITEM DESCRIPTION
DigiAlert (Net) Enables (ON) or disables (OFF) DigiAlert notification of an
alarm event over a Local Area Network. When an alarm
event is triggered and DigiAlert (Net) is ON, information
concerning the alarm event is dispatched to a specific IP
address. The PC at that IP address must have the DigiAlert
application installed in order to receive the alarm
notification. The default setting is ON.
E-mail Enables (ON) or disables (OFF) E-mail notification of an
alarm event. When an alarm event is triggered and Email
Notice is ON, an E-mail message concerning the alarm
event is dispatched. The default setting is OFF.
See E-Mail Notification on page 67 for more information.
NOTE: In order to enable E-mail notification, you must
have a valid DNS address. See your network
administrator and/or network service provider for
more information.
Pager Enables (ON) or disables (OFF) pager notification of an
alarm event. When an alarm is triggered and Pager is ON,
DigiMux dials the pager number via an external modem to
send notification of the alarm event. The default setting is
OFF. When you select ON, you can either select Continue
or Stop to continue or stop dialing the pager when an
event occurs.
NOTE: Pager requires an external USB Modem, or an
RS-232 Modem with a USB to RS-232 converter. A
dedicated analog standard POTS line is also
required. Do not use a PBX or digital line with this
modem.