User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index

DigiMux
Advanced Operations 59
Items on the Event Manager menu are described in the following table:
MENU ITEM DESCRIPTION
Day/Night Switch Determines DigiMux alarm processor behavior in
response to an external Day/Night switch. See
Day/Night Switch on page 60 for more information.
Event Response Determines DigiMux behavior in response to an alarm
event. See
Event Response on page 61 for more
information.
Motion Detection Enables you to set motion detection alarm parameters
for each camera on a DigiMux. See
Motion Detection on
page 68 for more information.
Alarm In Enables or disables alarm input detection, according to
the
Configuration Table on page 44. ON enables alarm
input detection. OFF disables alarm input detection. The
default setting is OFF.
Video Loss Detect Enables or disables Video Loss as an alarm event. ON
enables Video Loss alarm events, OFF disables them.
The default setting is ON.
Alarm Set/Reset SW Enables or disables the Alarm Set/Reset input. ON
(enable) activates the alarm output by an Alarm Set
signal, even if no alarm event has actually occurred, or
deactivates the alarm output by an Alarm Reset signal
after an alarm is triggered. OFF disables the Alarm
Set/Reset input. The default setting is ON.