User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index

User’s Manual
56 Advanced Operations
From the Record menu, move the cursor to Circular Recording and press Enter. The
following menu is displayed:
Items on the Circular Recording menu are described in the following table:
Circular Recording
1 Circular ON
2 Event Partition Full Alarm ON
3 Normal Partition Full Alarm ON
ITEM DESCRIPTION
Circular Enables circular recording. When set to ON, circular recording is
enabled. When set to OFF, recording stops when the hard disk
drive is full.
The default setting is ON. If Circular is ON, then Normal Partition
Full Alarm cannot be accessed.
Event Partition
Full Alarm
Triggers an alarm when the Event Partition is full if set to ON.
The event partition can be 0% to 90% of the available space.
When this alarm occurs, you can export important event data
and purge the drive for further event recording.
No alarm is triggered when set to OFF.
If the Event Partition is set to 0%, then Event Partition Full Alarm
cannot be accessed.
The default setting is ON.
Normal
Partition Full
Alarm
Triggers an alarm when the Normal Partition is full if set to ON.
NOTE: This option can only be accessed and changed Circular
Recording is OFF.
When the alarm occurs, you can export important data and
purge the drive for further recording.
No alarm is triggered when set to OFF.
The default setting is ON.