User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Advanced Operations 53
Stop Time Determines the end of recording for Day, Night, or Weekend
schedule sequences. Time is indicated in 15 minute
increments.
The Weekend schedule indicates the time and day on which
the weekend ends, i.e., MON 06:00. This value specifically
indicates where the regular Day and Night scheduling begins,
and Weekend recording ends.
Normal Rec IPS Sets the normal recording rate in IPS (pictures per second).
You can select a value, or select OFF. The default recording
rate is 30 IPS NTSC (25 IPS PAL).
Normal Rec
Quality
Sets the recording quality for normal recording. Selections
are Basic, Standard, Medium, High, and Superior quality (see
Recording Quality on page 51). The higher the quality
selected, the more disk space required. The default is
Standard quality.
Event Rec IPS Sets the alarm event recording rate in IPS (pictures per
second). You can select a value, or select OFF. The default
recording rate is 30 IPS NTSC (25 IPS
PAL).
Event Rec Quality Sets the recording quality for alarm event recording.
Selections are Basic, Standard, Medium, High, and Superior
quality (see
Recording Quality on page 51). The higher the
quality selected, the more disk space required. The default is
Standard quality.
Event Active Indicates the alarm events available to be recorded.
Selections are Alarm (alarm events), Motion (motion detection
events), Both, or None (no events active). The default is Both,
which includes Alarm and Motion event recording.
Event Record
Mode
Indicates the sequence in which events are recorded from the
cameras to the unit.
Unchanged mode indicates that no change from normal
sequencing is made for event recording. This is the default
setting.
Exclusive mode indicates that events are recorded
exclusively from the camera on which they occur for the
duration of the alarm.
Interleave indicates that events are recorded with other data,
but at an increased frequency. The sequence interleaves the
alarmed camera with the quiet, or non-alarmed cameras.
See Event Record Mode on page 54 for more details.
PARAMETER DESCRIPTION