User`s manual

User’s Manual
44 Advanced Operations
Configuration Table
NOTE: The Administrator’s passcode is required to use the Configuration Table.
There are multiple parameters that can be configured for each camera. A number of
these can only be accessed by the Administrator. The default values for the
parameters in the Configuration Table are shown in the tables below.
NOTE: The four- and nine-channel units have 4- and 9- column Configuration Tables,
respectively.
Use the Direction keys to move to a desired parameter, then press the Camera Select
key for the desired camera, or the Enter key to change the value. To navigate to
another page, use the Direction keys to move the cursor onto an arrow, and then
press Enter.
Show Camera Title Toggles the camera title display ON/OFF. The default is
ON, which displays the camera titles with the video from
each camera.
Camera Title Pos Determines the position of the camera title in the camera’s
display. The display position is Top-Left (T- L), Top-Right
(T- R), Bottom-Left (B-L), or Bottom-Right (B-R). The
default setting is Top-Left (T-L).
MENU ITEM DESCRIPTION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Video A A A A A A A A A Video A A A A A A A
Covert N N N N N N N N N Covert N N N N N N N
Termination Y Y Y Y Y Y Y Y Y Termination Y Y Y Y Y Y Y
Gain Control 5 5 5 5 5 5 5 5 5 Gain Control 5 5 5 5 5 5 5
Alarm In Type O O O C O O O O O Alarm In Type O O C O O O O
Day: Alm In Y Y Y Y Y Y Y Y Y Day: Alm In Y Y Y Y Y Y Y
Day: Motion 1 1 1 1 1 1 1 1 1 Day: Motion 1 1 1 1 1 1 1