User`s manual

DigiMux
Advanced Operations 43
CAMERA
The Camera menu provides access to the configuration parameters that can be set for
each camera (select 3 from the Main Menu). This menu is shown in the following
figure:
The items on the Camera menu enable you to set camera parameters, and to set, show
and position a title for each connected camera. Items in this menu are described in the
following table:
Screen Center Adjust Sets the center point of the Main Monitor display area.
5. Select Screen Center Adjust from the Monitor menu
and press Enter.
6. Position the screen center position using the
Direction keys.
7. Press Esc to exit when finished.
Show Color Bar Displays a color bar pattern. The color bar helps you to
adjust the monitor hue, saturation, text color, and
display options. Press any key to return to the menu
from a color bar display.
MONITOR MENU ITEM DESCRIPTION
Camera
1 Configuration Table
2 Camera Title
3 Show Camera Title ON
4 Camera Title Pos T-L
MENU ITEM DESCRIPTION
Configuration Table Sets the parameters that configure each camera connected
to the unit. See
Configuration Table on page 44 for more
information.
Camera Title Allows you to change the name of each camera connected
to the unit. By default, cameras are numbered 1 through
16. See
Camera Title on page 47 for more information.