User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Advanced Operations 41
When you use Set Date/Time, you reset the date and time used by the unit to record
video, but it does not change the date and time of previously recorded data that is
stored in the video database.
To use this command effectively, follow these steps:
1. Export the important data that you want to save from the video database to an
external drive using Export (see
Export on page 92).
2. Return to the Date/Time menu, select Set Date/Time, and press Enter.
3. Enter the desired date and time using UP/DOWN Direction keys to select the item
and the RIGHT/LEFT keys to adjust the value.
4. Select Update Now.
5. Purge the data on the unit by using the Purge Recording Data option on the
Record menu (see
Record on page 48).
6. Shut down the unit by pressing 4 + ESC simultaneously. (See Shutdown and Power
Up on page 99 for more information on shutting down and rebooting your unit.)
7. Power up your unit by pressing 1 + ESC simultaneously for 3 seconds.
After the unit is restarted, it uses the new date and time setting to accurately record
video with a time stamp.
MONITOR
The Monitor menu allows you to tune the quality of the displayed image. Select
Monitor from the Main Menu and press Enter. The following menu is displayed:
Items 1-3 allow you to adjust the display quality of any monitor by using the
RIGHT/LEFT keys to adjust the numeric value. The Saturation value is ignored for a
monochrome monitor.
Monitor
1 Brightness 35
2 Saturation 25
3 Call Monitor Dwell 003 sec
4 Call Monitor Schedule
5 Text Color 02
6 Screen Center Adjust
7 Show Color Bar