User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
40 Advanced Operations
Set Date/Time
NOTE: Administrators privileges are required to use Set Date/Time.
Select Set Date/Time from the Date/Time menu and press Enter to change the date
and/or time settings. The following menu is displayed
The time and date must be correctly set for the times recorded, for the Event List log,
and for the Day/Night switch behavior to function properly. Date and Time are
always displayed in the lower left corner of your main screen.
WARNING: USE WITH CAUTION. YOU SHOULD EXPORT IMPORTANT VIDEO
DATA BEFORE USING THIS COMMAND.
Date Display Mode Sets the date/time display type for the OSD (on-screen
display).
You can select Y/M/D, M/D/Y or D/M/Y, where Y = Year in
four digits (YYYY), M
= Month in two digits (MM), and
D
= Day in two digits (DD). The default setting is M/D/Y
in NTSC format, or D/M/Y in PAL format. Use the
RIGHT/LEFT keys to change the setting.
Date/Time Display Sets the date/time OSD (on-screen display) to 1 or 2
rows. The default is 2 rows.
Use the RIGHT/LEFT keys to change the setting.
Time Format Sets the time format to 12 hour or 24 hour format. The
default setting is 24 hour.
Use the RIGHT/LEFT keys to change the setting.
Time Sync Synchronizes the DigiMux time/date setting with
accessories connected to the unit by RS-485 connection.
Select Yes on the confirm page to synchronize the units,
or select No to return to the Date & Time menu
MENU ITEM DESCRIPTION
Date /Time
1 Year 2003
2 Month 4
3 Date 10
4 Hour 10
5 Minute 4
6 Second 23
7 Update Now