User`s manual

DigiMux
Advanced Operations 39
• When the cursor is above the desired character, press Enter to select it.
The character or option appears in the title bar.
•Press ESC to exit the menu and accept the character string.
• To erase or remove characters from the string, use the space character at the
bottom of the virtual keyboard.
Exiting a Menu
To exit the Main Menu, or to exit any menu and return to the previous menu, press
ESC. If you press ESC from the Main Menu, the following menu is displayed:
When exiting the Main Menu, you must choose whether to save or cancel the changes
made to the setup. Choose Save and Exit to save the new setup and exit the menu, or
choose Exit to leave the OSD without saving.
DATE/TIME
The Date/Time menu allows you to set the current date/time and other on-screen
display parameters. Select Date/Time from the Main Menu and press Enter. The
following menu is displayed:
To access an item on the menu, highlight the item with the cursor and press Enter. The
items in the Timer menu are described in the following table:
Exit
1 Save and Exit
2 Exit
Date/Time
1 Set Date/Time
2 Date Display Mode M/D/Y
3 Date/Time Display 2 Rows
4 Time Format 24 hr
5 Time Sync
MENU ITEM DESCRIPTION
Set Date/Time Sets the date and time on the unit. See Set Date/Time on
page 40 for information on how to set the date and time.