User`s manual

User’s Manual
38 Advanced Operations
FUNCTION KEYS IN OSD MENUS
Function key behavior is generally the same throughout all DigiMux menus with
some exceptions. This section discusses how to use the function keys in the on-screen
display (OSD) menus.
General Function Key Patterns in Menus
The following function key usage pattern is found in most DigiMux menus:
•Press Up/Down to access items in the menu that are not grayed out.
•Press Enter to enter a submenu.
•Press Left/Right to change a value, e.g. OFF to ON, or 1 to 3.
•Press Up/Down, if needed, to move to the next item in a value or submenu.
•Press ESC to exit a menu, submenu, or field.
Configuration Table Key Pattern
In the Configuration Table, the function key usage pattern is slightly modified. The
following function key pattern is used:
•Press Up/Down to access each of the Configuration Table options, or to move to the
options in the screen located downward or upward from your present position.
•Press Left/Right to select the desired camera in the table, or to move to the options
in the screen located to the left or right of your present position.
•Press Enter to change the selected option’s value for the desired camera. For
example, to change a value from 1 to 3, press Enter twice, or until you see the
value
3.
•Press ESC to exit the Configuration Table.
Entering Character Strings In Menus
When you enter character strings, such as those used in an E-mail address or a camera
name, a special virtual keyboard menu is displayed. This keyboard menu contains
upper and lower case letters and special characters. You can enter spaces or move
forward and backward using the bottom portion of the virtual keyboard.
Following is the function key pattern:
•Press LEFT/RIGHT to move left or right, respectively, through the characters in the
keyboard, or through the options at the bottom of the screen (such as a space).
•Press UP/DOWN to move up or down through the characters in the keyboard, or to
move to the options at the bottom of the screen.