User`s manual

User’s Manual
34 Basic Operations
3. The corresponding window on the Main Monitor displays an Event Icon to inform
you of the alarm.
4. The alarm video is recorded to the Events Partition.
5. The Main monitor switches to the alarmed camera channel if Event Full Screen is
enabled, and returns to its previous state when the alarm ends.
NOTE:Except in playback mode, Event Full Screen has the first priority over other
operations. If enabled, DigiMux will exit zoom, dome control mode, etc., to
switch to full screen when an alarm is triggered. If Any Key To Stop is
enabled, press any camera key to stop the alarm. Keys on the right side
of the unit are disabled except for Menu.
6. The Call Monitor switches to the alarmed camera. If more than one camera is
alarmed, the affected cameras are displayed in sequence.
7. The events are added to the Event List log (if enabled).
The above actions continue until the following conditions are met:
1. All the Alarm In pins are inactive.
2. The alarm output duration time has elapsed.
Motion Detection Alarm Event
A motion detection alarm event is triggered when measurable movement occurs in a
targeted area in the camera’s view. The camera must be set up for motion detection in
order to trigger the alarm (see
Motion Detection on page 68.)
The response triggered by a motion detection event is the same as for an Alarm In
event, with the exception that a motion detection event is recorded in the Event List
log with the label, “Motion Detect.”