User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
30 Basic Operations
Setting Presets
To set a preset in Dome Control, follow these steps for the affected camera:
1. To enter Dome Control, access Full Screen by pressing a Camera key, then
press
Set.
2. Position the dome as desired, using the Direction keys.
3. Press 2 to select the Set Preset function.
The Set Preset menu is displayed.
4. Select the desired preset number from the menu using the Direction keys
(Up/Down).
5. Press Enter.
The preset is set and ready to call.
Focus Near
/ Focus Far
Focus Near
Focus Far
Use the Focus Near (Pause)/Focus Far (Seq) keys to
focus the dome camera near or far.
Zoom In /
Zoom Out
Zoom In
Zoom Out
Use the Zoom In (Mode)/ Zoom Out (Playback) keys to
zoom the dome camera in or out, viewing less or more of
an area, respectively.
FUNCTION
KEY
KEY ICON DESCRIPTION