User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Basic Operations 29
Set Preset Use to set up dome control preset positions. DigiMux
allows you to set up to 7 preset positions with the
American Dynamics Optima domes. Up to 96 preset
positions can be set with American Dynamics Ultra
Dome VII domes.
NOTE: The number of presets available depends on the
dome manufacturer.
For information on how to set a preset, see Setting Presets
on page 30.
Toggle
Hint
Screen
Use to toggle the Hint Screen that contains the dome
parameter information. Press 3 to hide the screen. Press
3 again, in Dome Control mode, to redisplay the screen.
Pan/Tilt Use the Direction keys to pan and tilt the dome.
Set Use to enter Dome Control mode from Live and Full
Screen video mode. When you are in Dome Control
mode, press Set to access the Run Pattern menu. For
more information, see
Running Patterns on page 31.
Auto/Enter Use Enter to select from a menu, such as selecting a
Preset. In Dome Control Mode, Auto is an Automatic
Focus and Iris Control key.
ESC Use to leave Dome Control mode and return to Live and
Full Screen video mode.
Iris Open /
Iris Close
Iris Open
Iris Close
Use the Iris Open (Menu)/Iris Close (Lock) keys to open
and close the Iris on the dome camera.
FUNCTION
KEY
KEY ICON DESCRIPTION