User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
User’s Manual
26 Basic Operations
Pre-alarm video will not be available in the following circumstances:
• Right after DigiMux is powered up
• Record is set in linear mode and the normal partition is full
• Normal record is OFF and the DigiMux is setup for alarm record only
• Event partition is full or set to 0%
The Event List Display
The list displays each event by Date, Time, Type of Event, and Camera Channel. The
following table displays the event type descriptions:
Playing Back Video from the Event List
To perform this playback, you select an event from this list. Follow these steps to play
back a specific event from the list:
1. Press Playback.
2. Press Down for an Event List search. The list of events from the event history log
is displayed.
3. Use Up/Down to scroll through the Event List.
4. If necessary, use Right/Left to navigate to the next or previous page of events,
respectively. The number of available pages depends on the number of recorded
events in the history log.
5. Press Enter to play back the selected event video.
6. Press Playback to return to live video.
Deleting an Event from the List in Playback Mode
You can delete or remove entries from the Event List. To delete an event, follow these
steps:
1. Press Playback.
2. Press Down for an Event List search. The list of events from the event history log
is displayed.
EVENT
TYPE
DESCRIPTION
A Alarm In event
V Video Loss event
M Motion Detection event