User`s manual
Table Of Contents
- DigiMux User's Manual, English
- DigiMux User's Manual, English
- Table of Contents
- Overview
- System Installation
- Basic Operations
- Front Panel Controls
- Viewing Live and Playback Video Images
- Record and Playback Operation
- Recording
- Quick Record Setting Changes
- Playback Operations
- Playback Controls
- Date/Time Video Playback
- Single Step Advance and Reversing Playback Direction
- Event List Playback
- The Event List
- Event Recording and Playback
- Pre-Alarm Availability
- The Event List Display
- Playing Back Video from the Event List
- Deleting an Event from the List in Playback Mode
- Deleting a Page from the Event List
- Covert Cameras
- Dome Control
- Dome Control Signals Installation
- Basic Alarm Features
- Advanced Operations
- System Information and Administration
- Maintenance
- Glossary
- Appendices
- Appendix A: Account Access and Priorities
- Appendix B: Connector Pin Assignments
- Appendix C: Technical Specifications
- Appendix D: Optional Connections and Installation
- Optional Connections
- Audio Connection
- IP Address Setup Information
- Dial-Up Connections via Modem
- Establishing the Dial-Out Connection: DigiMux to a PC
- Establishing the Dial-In Connection: PC to a DigiMux
- Using the Dial-Up Connections
- Connecting Extended Storage Module (ESM) Units
- Disconnecting Extended Storage Module (ESM) Units
- Additional Installation Information
- Appendix E: DigiRemote
- Appendix F: DigiMux Digital Signatures
- Appendix G: Using ControlCenter 200/300 Keyboards
- Appendix H: Troubleshooting Guide
- Index
DigiMux
Basic Operations 23
Playback Controls
The Playback key allows you to switch between live and playback modes. To control
video playback, use these function keys:
• Go To or Search (Up)
• Event List (Down)
• Reverse Playback (Left)
• Forward Playback (Right).
You can increase the speed of reverse or forward playback by 1x, 2x, 4x, 8x, 16x, or
32x. Press Right or Left repeatedly in Playback mode to increase the speed in the
desired direction.
Date/Time Video Playback
You can play back video that was recorded on a specific date at a specific time. When
you specify the date and time, the unit searches the database for video that matches
your criteria and plays that video on the Main Monitor.
NOTE: If there is no available recorded video that matches your specified time and
date, the unit starts playback from the next available video spot in the record
database.
Follow these steps to perform a Date/Time playback:
1. Press Playback.
2. Press Up for a Date/Time search, or Go To. The time frame of available video is
displayed.
3. Use Up/Down to select the Date on the screen. Use Right/Left to edit the values.
4. Use Up/Down to select the Time on the screen. Use Right/Left to edit the values.
5. Press Enter to start playback.
6. When you are finished viewing playback, press Playback to return to live video.
Single Step Advance and Reversing Playback Direction
There is no backward single step (frame advance) on Playback.
To advance forward, press PAUSE during playback. Continue to press PAUSE
repeatedly to advance the frames forward. The number of steps necessary to view
frame advancement depends on the setup of your record parameters.
In playback mode, the playback direction can be reversed only if the start or end of
the available recorded video is not reached. If the start or end of the recorded video is
reached, operators have the option of returning to the search screens (time, event) or
returning to live display mode.